Based on Direct Digital Synthesized (DDS) technology and unique FPGA design SFG-2000/2100 Series Function Generators are built with exceptionally high performance far exceeding that of any conventional function generators at a very competitive price. Stable output frequency low distortion and fine frequency resolution are the most remarkable characteristics of this product series.

MAIN

Frequency Range
(For Sine Square)

1Hz~20MHz

Frequency Range
(For Triangle)

1Hz~1MHz

Frequency Resolution

1Hz

Frequency Stability

∮ 20 ppm

Frequency Accuracy

∮ 20 ppm

Frequency Aging

∮ 5 ppm / year

Output Function

Sine Square Triangle

Amplitude Range

2mV~10Vpp(into 50load)

Impedance

50∮10

Attenuator

-20dB∮1dB⊙2

DC Offset

?-5V°?+5V(into 50load)

Duty Control Range

20% to 80% 2Hz~1MHz (Square wave only)

Range Resolution

1%

Display

9 digits LED display

SINE WAVE

Harmonics Distortion

-55dBc0.1Hz°200kHz; -40dBc0.2MHz°4MHz; -30dBc4MHz°10MHz
(Specification applied to both TTL/CMOS OFF and from MAX. to 1/10 level)

Flatness (Relative to 1kHz)

?∮ 0.3dB0.1Hz°1MHz; ?∮ 0.5dB1MHz°4MHz; ?∮ 2dB 4MHz°10MHz

TRIANGLE WAVE

Linearity

≠980.1Hz°100kHz;≠95100kHz°1MHz

SQUARE WAVE

Symmetry

∮ 1% of period +4ns to 0.1Hz°100kHz

Rise or Fall Time

?25ns at maximum output.(into 50load)

CMOS OUTPUT

Level

4Vpp∮1Vpp°15Vpp∮1Vpp adjustable; Rise or Fall Time ?120ns

TTL OUTPUT

Level

≠3Vpp ; Fan Out; 20 TTL load ; Rise or Fall Time ?25ns

SWEEP OPERATION

Rate

100:1 ratio max. and adjustable
( In order to get maximum sweep span the sweep time needs to be tuned on when adjust sweep span. )

Time

1Sec°30Sec adjustable
( When the sweep time is too long the stop frequency will reach and stay at the maximum frequency of instrument until the end of the sweep cycle. )

Mode

Lin./Log. switch selector

AMPLITUDE MODULATION

Depth & Modulation Frequency

0°100 ; 400Hz(INT) DC°1MHz(EXT)

Carrier BW

100Hz°5MHz(-3dB)

EXT Modulation Sensitivity

? 10Vpp for 100modulation

FREQUENCY MODULATION

Deviation & Modulation Frequency

0°∮50kHzcenter at 1MHz 400Hz fixed(INT) 1kHz fixed(EXT)

EXT Modulation Sensitivity

? 10Vpp for 10% modulation (center at 1MHz)

FREQUENCY COUNTER

Range

5Hz°150MHz

Accuracy

Time base accuracy∮1count

Time base

∮20ppm(23∮5)after 30 minutes warm up

Resolution

The maximum resolution is 100nHz for 1Hz and 0.1Hz for 100MHz

Input Impedance

1M/150pf

Sensitivity

? 35mVrms (5Hz~100MHz)
? 45mVrms (100MHz~150MHz)

STORE/RECALL FUNCTION

10 groups of Setting memories

POWER SOURCE

AC115V∮10% AC 230V+10%/-15% 50/60Hz

ACCESSORIES

Instruction manual⊙1
Power Cord x 1
GTL-101⊙ 2

DIMENSION & WEIGHT

266(W)⊙107(H)⊙293(D) mm
Approx. 3.2kg